12 MTR V-Nosed Punt New build - order right here.
Call or fill in the 'Enquire Here' form to get started
We have made some improvements to this Work Boat design. Firstly, the ride in this work boat is so much better. Secondly, we have included two steps at the transom. One on either side of the outboard which makes access much easier. Thirdly, the Outboard is now protected by a bumper bar. You will notice the front push bar mounted on top of the full-length stringers is now standard. Lastly the work boat has a sealed self-draining deck (AMSA compliant) that not only has foam underneath but the gunwale also have foam under them.
The gunwales are 4mm folded plate and the top of the gunwale is 150mm wide. This provides the V-Nosed Punt with a new level of stiffness to the vessel and allows for side rails. Now a standard feature. Gunwales custom HDPE fendering system fitted to port and starboard gunwale and bow. This system slides on contact and does not grab and tear like rubber. The Lifting points are now standard. (these are non certified, please let me know if you need certification as there is a cost involved for this). Ask me about the GA for twin outboards with centre console. Will emailed on request.
V-Nosed Punt
LOA: 12.62 metre
Measure Length: 11.95 metre
Beam: 3.4 metre
Draft: .150mm .425 mm (Hull)
Outboard: 2 x 140hp
Fuel: 200ltr
Take a look at the other V-Nosed Punt sizes to choose from:
6.5 mtr - 7.5 mtr - 8.5 mtr - 10.5 mtr