NEW 2026 BUILD | $75,000 + GST | AUSTRALIAN BUILT | 1,200KG PAYLOAD
Here is a compact new-build commercial work boat designed to do a real job.
At 5.9m long and 2.45m wide, this rugged aluminium utility boat gives commercial operators a substantial working deck, 1,200kg payload capacity and the ability to transport the vessel between work sites.
The builder has designed this boat specifically around practical commercial use, combining heavy-duty aluminium construction with useful deck fittings, integrated storage and protection around the working areas.
Available late October 2026.
This boat provides a large, uncluttered working deck with integrated storage lockers to keep equipment organised and accessible.
The builder has fitted four rated lifting lugs, six heavy-duty rubber push bumps, four heavy-duty bollards and an integrated tow post, giving the vessel the practical features operators expect from a commercial utility boat.
The sealed, self-draining deck makes it particularly practical for wet working environments, while the dedicated engine guard provides additional protection around the outboard.
With a maximum payload of 1,200kg and capacity for up to eight people, this boat offers substantial carrying capability for a vessel of its size.
The hull uses 4mm 5083 marine-grade aluminium plate, with the transom and push frame constructed from 6mm 5083 aluminium.
The design also incorporates level flotation intended to comply with NSCV/AS1799 requirements.
This new work boat includes:
Trailer available on request.
A major advantage of this vessel is its Australian construction.
The builder is producing this vessel locally in Australia, giving buyers an opportunity to purchase a new commercial work boat built here rather than a recreational vessel adapted for commercial use.
The builder is also developing a range of commercial vessels, making this an opportunity to establish a relationship for future builds or modifications where an operator requires a vessel designed around a particular job.
The vessel is specified with Ex02 / 2D / 2E survey documentation, with 2C survey available on request.
If you require 2C survey for your operation, discuss your intended use and operating area before purchase so the appropriate compliance requirements can be confirmed.
The combination of 1,200kg payload, generous beam, open working deck and trailerability makes this boat suitable for a wide range of commercial applications.
Potential uses include:
The boat's trailerable size also allows operators to move it between locations rather than committing it permanently to one work site.
If you need a new aluminium work boat with serious payload capacity, this 5.9m vessel offers a practical alternative to buying an older commercial boat and spending money bringing it up to working standard.
You get a new 5083 aluminium hull, Mercury SeaPro 60hp power, commercial-grade fittings, self-draining deck and 1,200kg payload capacity.
$75,000 + GST
Available late October 2026.
Contact Commercial Boats for full specifications, trailer options, 2C survey requirements or further information.
Yes. This is a new 2026-build aluminium commercial work boat. (Built on spec)
This particular vessel is built in Australia.
The hull uses 4mm 5083 aluminium plate, with a 6mm 5083 aluminium transom and push frame.
The stated maximum payload is 1,200kg.
The boat has a maximum capacity of 8 persons, subject to the applicable survey and operating requirements.
The boat comes with a Mercury SeaPro 60hp outboard with electric tiller controls.
Yes. The boat has a sealed, self-draining deck.
Yes. The boat incorporates level flotation intended to comply with NSCV/AS1799 requirements.
A trailer is available on request.
The vessel is specified with Ex02 / 2D / 2E survey documentation. 2C survey is available on request, subject to the intended operation and applicable requirements.
The boat uses a 55-litre portable fuel tank.
Yes. The boat was designed as a commercial utility/work boat, with a large working deck, 1,200kg payload and heavy-duty commercial fittings.
It can suit a range of applications including marine construction, maintenance, aquaculture, environmental work, civil projects, equipment transport, government operations and general marine contracting.
The current vessel is scheduled for late October 2026 availability.
The asking price is $75,000 + GST.
Yes. 2C survey is available on request. The buyer's intended operation and operating area will determine the applicable requirements
